A Competitive High‐Throughput Screening Platform for Designing Polylactic Acid‐Specific Binding Peptides

Advanced Science, vol. 10, pp. e2303195

Abstract

Abstract Among biobased polymers, polylactic acid (PLA) is recognized as one of the most promising bioplastics to replace petrochemical‐based polymers. PLA is typically blended with other polymers such as polypropylene (PP) for improved melt processability, thermal stability, and stiffness. A technical challenge in recycling of PLA/PP blends is the sorting/separation of PLA from PP. Material binding peptides (MBPs) can bind to various materials. Engineered MBPs that can bind in a material‐specific manner have a high potential for material‐specific detection or enhanced degradation of PLA in mixed PLA/PP plastics. To obtain a material‐specific MBP for PLA binding (termed PLA bodies ), protein engineering of MBP Cg‐Def for improved PLA binding specificity is reported in this work. In detail, a 96‐well microtiter plate based high‐throughput screening system for PLA specific binding (PLABS) was developed and validated in a protein engineering (KnowVolution) campaign. Finally, the Cg‐Def variant V2 (Cg‐Def S19K/K10L/N13H) with a 2.3‐fold improved PLA binding specificity compared to PP was obtained. Contact angle and surface plasmon resonance measurements confirmed improved material‐specific binding of V2 to PLA (1.30‐fold improved PLA surface coverage). The established PLABS screening platform represents a general methodology for designing PLA bodies for applications in detection, sorting, and material‐specific degradation of PLA in mixed plastics.

Authors 5

1. Yi Lu Aachen Institute of Biotechnology

   RWTH Aachen University

   Affiliation as printed

   Institute of Biotechnology RWTH Aachen University 52074 Aachen Germany

   Institute of Biotechnology, RWTH Aachen University, 52074 Aachen, Germany

2. Kai‐Wolfgang Hintzen Aachen Institute of Biotechnology DWI - Leibniz Institute for Interactive Materials

   DWI – Leibniz Institute for Interactive Materials · RWTH Aachen University

   Affiliation as printed

   DWI‐Leibniz Institute for Interactive Materials 52074 Aachen Germany

   Institute of Biotechnology RWTH Aachen University 52074 Aachen Germany

   DWI-Leibniz Institute for Interactive Materials, 52074 Aachen, Germany

   Institute of Biotechnology, RWTH Aachen University, 52074 Aachen, Germany

3. Tetiana Kurkina Aachen Institute of Biotechnology

   RWTH Aachen University

   Affiliation as printed

   Institute of Biotechnology RWTH Aachen University 52074 Aachen Germany

   Institute of Biotechnology, RWTH Aachen University, 52074 Aachen, Germany

4. Yu Ji corresponding Aachen Institute of Biotechnology

   RWTH Aachen University

   Affiliation as printed

   Institute of Biotechnology RWTH Aachen University 52074 Aachen Germany

   Institute of Biotechnology, RWTH Aachen University, 52074 Aachen, Germany

5. Ulrich Schwaneberg corresponding Aachen Institute of Biotechnology DWI - Leibniz Institute for Interactive Materials

   DWI – Leibniz Institute for Interactive Materials · RWTH Aachen University

   Affiliation as printed

   DWI‐Leibniz Institute for Interactive Materials 52074 Aachen Germany

   Institute of Biotechnology RWTH Aachen University 52074 Aachen Germany

   DWI-Leibniz Institute for Interactive Materials, 52074 Aachen, Germany

   Institute of Biotechnology, RWTH Aachen University, 52074 Aachen, Germany