Weight-scheduling for linear time-variant model predictive wind turbine control toward field testing

Forschung im Ingenieurwesen, vol. 85, pp. 385–394

Abstract

Abstract Modern multi-megawatt wind turbines require powerful control algorithms which consider several control objectives at the same time and respect process constraints. Model predictive control (MPC) is a promising control method and has been a research topic for years. So far, very few studies evaluated MPC algorithms in field tests. This work aims to prepare a real-time MPC system for a full-scale field test in a 3 MW wind turbine. To this end, we introduce a weight-scheduling scheme for a linear time-variant MPC in order to ensure control operation over the entire operating range from the partial to the full load range. We use a rapid control prototyping process, in particular with comprehensive software-in-the-loop (SiL) tests, in order to design and validate the MPC system for the field test. In this contribution, we present the implementation of the linear time-variant MPC with weight-scheduling to be tested in the field test. With the weight-scheduling for the optimization problem inside the MPC, we achieved good performance over the entire operating range of the wind turbine. In the SiL tests, the proposed MPC algorithm achieved loads, comparable to the baseline controller of the wind turbine and improved the reference tracking of the power output and the rotational speed. The proposed linear time-variant MPC with weight-scheduling is fully validated in the presented software-in-the-loop tests and is ready for full-scale field test in the 3 MW wind turbine. We present the experimental field test results of the introduced MPC system in a separated contribution.

Authors 5

1. Thorben Wintermeyer‐Kallen corresponding Aachen Institute of Automatic Control (IRT)

   RWTH Aachen University

   Affiliation as printed

   Institute of Automatic Control, RWTH Aachen University, Campus-Boulevard 30, 52074, Aachen, Germany

   Institute of Automatic Control, RWTH Aachen University, Campus-Boulevard 30, 52074, Aachen, Germany

2. Sebastian Dickler Aachen Institute of Automatic Control (IRT)

   RWTH Aachen University

   Affiliation as printed

   Institute of Automatic Control, RWTH Aachen University, Campus-Boulevard 30, 52074, Aachen, Germany

   Institute of Automatic Control, RWTH Aachen University, Campus-Boulevard 30, 52074, Aachen, Germany

3. János Zierath
   Affiliation as printed

   W2E Wind to Energy GmbH, Grubenstraße 44, 18055, Rostock, Germany

   W2E Wind to Energy GmbH, Grubenstraße 44, 18055, Rostock, Germany

4. Thomas Konrad Aachen Institute of Automatic Control (IRT)

   RWTH Aachen University

   Affiliation as printed

   Institute of Automatic Control, RWTH Aachen University, Campus-Boulevard 30, 52074, Aachen, Germany

   Institute of Automatic Control, RWTH Aachen University, Campus-Boulevard 30, 52074, Aachen, Germany

5. Dirk Abel Aachen Institute of Automatic Control (IRT)

   RWTH Aachen University

   Affiliation as printed

   Institute of Automatic Control, RWTH Aachen University, Campus-Boulevard 30, 52074, Aachen, Germany

   Institute of Automatic Control, RWTH Aachen University, Campus-Boulevard 30, 52074, Aachen, Germany