Morphology Engineering of Mixed Ionic Electronic Conductors through Aqueous Phase Separation

arXiv (Cornell University)

Abstract

The performance of organic electrochemical transistors (OECTs) is fundamentally governed by the interplay between ionic accessibility and electronic transport within organic mixed ionic-electronic conductors. Although increasing channel thickness enhances transconductance, it also prolongs ion transport, resulting in the well-known gain-speed trade-off. Here, we demonstrate that engineering the internal morphology of PEDOT:PSS:PEI films through pH-induced aqueous phase separation provides an effective route to mitigate this limitation. The resulting interconnected pore network promotes electrolyte penetration and increases the electrochemically addressable volume, while DMSO treatment and annealing enhance the continuity and ordering of the PEDOT-rich electronic phase. Consequently, porous OECT channels achieve a transconductance of 30 mS and a response time of 13 ms at an ultralow gate voltage of 0.05 V despite channel thicknesses exceeding 100 um. Comparison of films with comparable electronic conductivity but different pore architectures identifies morphology as the dominant factor governing device performance, supporting a transition from predominantly surface-limited modulation toward spatially distributed mixed ionic-electronic transport. Beyond demonstrating a scalable water-based fabrication strategy, this work establishes internal morphology as a design parameter that complements molecular structure and device geometry in organic mixed conductors, providing a general framework for the development of high-performance OECTs, soft bioelectronics, and future neuromorphic materials.

Authors 4

1. Siqi Wang Aachen Chemical Process Engineering

   RWTH Aachen University

   Affiliation as printed

   Chemical Process Engineering (AVT.CVT) , RWTH Aachen University , Forckenbeckstraße 51 , 52074 Aachen , Germany

2. Maria Restrepo Aachen Chemical Process Engineering

   RWTH Aachen University

   Affiliation as printed

   Chemical Process Engineering (AVT.CVT) , RWTH Aachen University , Forckenbeckstraße 51 , 52074 Aachen , Germany

3. John Linkhorst

   Technische Universität Darmstadt

   Affiliation as printed

   Technische Universität Darmstadt , Verfahrenstechnik elektrochemischer Systeme , Otto-Berndt-Straße 2 , 64287 Darmstadt , Germany

4. Matthias Weßling Aachen Chemical Process Engineering DWI-Leibniz-Institute for Interactive Materials e.V

   DWI – Leibniz Institute for Interactive Materials · RWTH Aachen University

   Affiliation as printed

   Chemical Process Engineering (AVT.CVT) , RWTH Aachen University , Forckenbeckstraße 51 , 52074 Aachen , Germany

   DWI -Leibniz Institute for Interactive Materials e.V. , Forckenbeckstraße 50 , 52074 Aachen , Germany