Concepts and prototyping for scalable quantum computing based on conveyor-mode single-electron shuttling

RWTH Publications (RWTH Aachen)

Abstract

Universal quantum computing promises solutions to a wide range of problems of significant scientific and socioeconomic impact that are computationally intractable using classical hardware. Since physical qubits are inherently noisy and prone to decoherence, realizing a sufficient number of logical qubits to unlock practically relevant problem classes will likely require quantum error correction, resulting in an overhead of millions of physical qubits. Among all competing hardware platforms, spin qubits in gate-defined quantum dots are uniquely positioned: single- and two-qubit gate fidelities routinely exceed the error-correction threshold, and the experimentally proven compatibility with industrial-grade semiconductor manufacturing may enable millions of qubits on a single chip. Realizing this potential, however, requires quantum processor architectures that scale to large qubit numbers with two‑dimensional connectivity while maintaining high operational fidelities. Building on the theoretical feasibility of high‑fidelity spin‑coherent electron shuttling, the SpinBus architecture is introduced to enable scaling to application-relevant qubit numbers. The SpinBus architecture leverages the conveyor-mode shuttling device named Quantum Bus (QuBus) for coherent qubit coupling over micron‑scale distances to accommodate, at the level of the quantum processor chip, wiring fan‑out and locally integrated control electronics at cryogenic temperatures. Device simulations for all relevant operations in the Si/SiGe platform validate operation fidelities exceeding 99 % as well as compatibility with the requirements of established semiconductor patterning technology. Control with room‑temperature electronics plausibly supports at least 144 qubits, while substantially larger quantum processor sizes are conceivable using cryogenic control electronics. For the experimental realization of QuBus devices, a novel high‑yield multilayer electron-beam lithography process, which can readily be adapted to different device layouts, was developed to fabricate the required > 100 aligned metallic gate electrodes. Benchmarking with a semiconductor industry‑inspired methodology and inspection of > 100 devices demonstrated 99 % gate fabrication yield and at least 5 nm overlay accuracy. Utilizing GaAs/(Al,Ga)As QuBus prototype devices with a 7 µm shuttling channel for quantized-current experiments validated key criteria for conveyor-mode shuttling, in particular linear current scaling for operation frequencies up to 40 MHz, and provided preliminary evidence consistent with quantized conveyor-mode electron transfer. These results support the viability of conveyor-mode shuttling for qubit coupling and indicate the suitability of QuBus devices for metrological applications.

Authors 1

1. Matthias Künne corresponding Aachen

   RWTH Aachen University

   Affiliation as printed

   RWTH Aachen