Assessing the Challenges of Urban Flood Modelling: A Sensitivity Analysis Using a TELEMAC-2D Rain-on-Grid Framework in the Emscher Catchment

Water, vol. 18, pp. 1224

Abstract

Urban flood modelling in heavily engineered catchments requires model structures that capture not only surface runoff processes but also hydraulic infrastructure and operational controls. This study applies a TELEMAC-2D rain-on-grid framework to two urban sub-catchments of the Emscher River (North Rhine-Westphalia, Germany) to quantify the relative effects of surface calibration, explicit infrastructure representation, and operational rules on the simulated flood response. A stepwise model development workflow was implemented, including land use-based calibration of Manning’s n and SCS Curve Numbers, explicit integration of culverts and bridges, and rule-based representation of retention basins and pumping stations. Model performance was evaluated using hydrograph shape, peak discharge, peak timing, event volume, and inundation behaviour across different antecedent moisture conditions (AMC). The results show that surface calibration alone was insufficient to consistently reproduce observed hydrographs. In the Rossbach sub-catchment area, integrating retention basins, pumping stations, and operational rules improved model performance from NSE = −0.129 under AMC I to NSE = 0.773 under AMC III. RMSE decreased from 3.380 to 1.515 m3 s−1, peak discharge error from −6.198 to −0.492 m3 s−1, and volume bias from −0.664 to +0.038. A targeted, routing-focused calibration further improved timing behaviour but increased volume bias, indicating residual deficiencies in the representation of rapid urban conveyance pathways. The findings show that reliable urban flood simulation in infrastructure-rich catchments depends not only on calibrating surface parameters but also on explicitly representing hydraulic structures, operational controls, and antecedent wetness conditions.

Authors 3

1. Julian Hofmann Aachen Institute of Hydraulic Engineering and Water Resources Management

   RWTH Aachen University

   Affiliation as printed

   Institute of Hydraulic Engineering and Water Resources Management, RWTH Aachen University, 52074 Aachen, Germany

2. Adrian Delos Santos Almoradie

   Emschergenossenschaft

   Affiliation as printed

   Emschergenossenschaft und Lippeverband, 45128 Essen, Germany

3. Catrina Brüll Aachen Institute of Hydraulic Engineering and Water Resources Management

   RWTH Aachen University

   Affiliation as printed

   Institute of Hydraulic Engineering and Water Resources Management, RWTH Aachen University, 52074 Aachen, Germany