Casting of complex open cellular structures using high manganese steel

Advanced Manufacturing, pp. 1–16

Abstract

High manganese steels offer an excellent combination of high strength and good ductility, making them ideal for lightweight and energy absorbing applications such as open cellular structures. Additive manufacturing is often used to produce metallic open cellular structures since it allows a high complexity of the geometry and high material efficiency, but the structures often exhibit anisotropic behavior and processing requires specific powder sizes with correspondingly high prices. This study therefore addresses the feasibility of investment casting to produce open cellular structures. A high manganese X30Mn22 base alloy with different contents of aluminum (0, 1 and 5 wt %) was used for the manufacturing of a newly designed cell structure. Processing parameters and mold materials needed to be adjusted due to pronounced chemical reactions with the commercial SiO2-based mold material. Using an Al2O3-based mold material and increasing the mold temperature during casting to 1000 °C allowed for the successful casting of high manganese steel structures with different designs regarding the strut diameter. Quasi-static compression tests of the structures confirm the cast quality and illustrate the effect of increasing alloying contents of Al on the deformation behavior, building the foundation for the development of programmable cellular structures for energy absorbing applications.

Authors 8

1. Claudia Drebenstedt corresponding

   Fraunhofer Institute for Machine Tools and Forming Technology

   Affiliation as printed

   Fraunhofer Institute for Machine Tools and Forming Technology IWU, 09126 Chemnitz, Germany

2. Jörg Hohlfeld

   Fraunhofer Institute for Machine Tools and Forming Technology

   Affiliation as printed

   Fraunhofer Institute for Machine Tools and Forming Technology IWU, 09126 Chemnitz, Germany

3. Christian Hannemann

   Fraunhofer Institute for Machine Tools and Forming Technology

   Affiliation as printed

   Fraunhofer Institute for Machine Tools and Forming Technology IWU, 09126 Chemnitz, Germany

4. Nadja Berndt

   Fraunhofer Institute for Machine Tools and Forming Technology

   Affiliation as printed

   Fraunhofer Institute for Machine Tools and Forming Technology IWU, 09126 Chemnitz, Germany

5. Ulrich Krupp Aachen Steel Institute

   RWTH Aachen University

   Affiliation as printed

   RWTH Aachen University, Steel Institute, 52072 Aachen, Germany

6. Thomas Hipke

   Fraunhofer Institute for Machine Tools and Forming Technology

   Affiliation as printed

   Fraunhofer Institute for Machine Tools and Forming Technology IWU, 09126 Chemnitz, Germany

7. Dilay Kibaroglu

   Technische Universität Berlin

   Affiliation as printed

   Technical University Berlin, Chair Materials for Additive Manufacturing, 10587 Berlin, Germany

8. Christian Haase

   Technische Universität Berlin

   Affiliation as printed

   Technical University Berlin, Chair Materials for Additive Manufacturing, 10587 Berlin, Germany