Preventive DC‐side decoupling: A system integrity protection scheme to limit the impact of DC faults in offshore multi‐terminal HVDC systems

IET Generation Transmission & Distribution, vol. 18, pp. 3801–3816

Abstract

Abstract To create synergies between offshore wind integration and operational flexibility, interconnecting HVDC links to multi‐terminal networks is highly desired. However, its technical realisation remains a major challenge: In particular, it is crucial to prevent DC faults from leading to an intolerable loss of power infeed to the connected AC grids. To restrict this loss of power infeed, this paper proposes a concept for linear HVDC networks that is based on state‐of‐the‐art equipment only—that is, without dependence on DC circuit breakers. In this concept, the DC interconnection is preventively decoupled via DC high‐speed switches whenever the cumulative wind infeed exceeds the frequency containment reserve of the AC grid, but remains coupled at all other times. The decoupling is realised via controlling the coupling line current to zero through coordinated setpoint changes for the converters’ ( V DC / P )‐droop controls. Both the decoupling sequence and the DC fault behaviour in decoupled state are validated via EMT simulations. In addition, limitations with regard to expandability are discussed. The proposed concept may not only limit the loss of infeed, but mitigates risks as a fall‐back level for more complex offshore (multi‐vendor) multi‐terminal HVDC topologies—and may thus accelerate their development at reasonable costs.

Authors 7

1. Patrick Düllmann corresponding Aachen Institute for High Voltage Equipment and Grids Faculty of Electrical Engineering and Information Technology

   RWTH Aachen University

   Affiliation as printed

   Institute for High Voltage Equipment and Grids, Digitalization and Energy Economics (IAEW), Faculty of Electrical Engineering and Information Technology RWTH Aachen University Aachen Germany

   Institute for High Voltage Equipment and Grids, Digitalization and Energy Economics (IAEW), Faculty of Electrical Engineering and Information Technology, RWTH Aachen University, Aachen, Germany

2. Christopher Klein Aachen Institute for High Voltage Equipment and Grids Faculty of Electrical Engineering and Information Technology

   RWTH Aachen University

   Affiliation as printed

   Institute for High Voltage Equipment and Grids, Digitalization and Energy Economics (IAEW), Faculty of Electrical Engineering and Information Technology RWTH Aachen University Aachen Germany

   Institute for High Voltage Equipment and Grids, Digitalization and Energy Economics (IAEW), Faculty of Electrical Engineering and Information Technology, RWTH Aachen University, Aachen, Germany

3. Pascal Winter
   Affiliation as printed

   Offshore Amprion GmbH Dortmund Germany

   Offshore, Amprion GmbH, Dortmund, Germany

4. Hendrik Köhler
   Affiliation as printed

   Offshore Amprion GmbH Dortmund Germany

   Offshore, Amprion GmbH, Dortmund, Germany

5. Michael Steglich
   Affiliation as printed

   Offshore Amprion GmbH Dortmund Germany

   Offshore, Amprion GmbH, Dortmund, Germany

6. Jan Teuwsen
   Affiliation as printed

   Offshore Amprion GmbH Dortmund Germany

   Offshore, Amprion GmbH, Dortmund, Germany

7. Willem Leterme Aachen Institute for High Voltage Equipment and Grids Faculty of Electrical Engineering and Information Technology

   RWTH Aachen University

   Affiliation as printed

   Institute for High Voltage Equipment and Grids, Digitalization and Energy Economics (IAEW), Faculty of Electrical Engineering and Information Technology RWTH Aachen University Aachen Germany

   Institute for High Voltage Equipment and Grids, Digitalization and Energy Economics (IAEW), Faculty of Electrical Engineering and Information Technology, RWTH Aachen University, Aachen, Germany