Numerical Modelling of Debris Flows for Simulation-Based Decision Support: An Indian Perspective
Indian geotechnical journal, vol. 55, pp. 2680–2692
Abstract
Abstract Debris flows are catastrophic landslides owing to their very high velocities and impact. The number of such flows is likely to increase due to an increase of extreme weather events in a changing climate. At the same time, risk reduction and mitigation plans call for a quantitative assessment of the hazard. Numerical models are powerful tools in quantifying debris flows in terms of flow height and velocity with respect to both space and time, and to derive mitigation-relevant diagnostics such as impacted area. However, the current modelling practices possess critical challenges that limit their application in a forward-directed analysis to predict the debris flow’s impact. This work provides an overview of the past and current practices in debris flow modelling, their potential use in simulation-based decision support and the challenges and future research scope in computational debris flow modelling, based on the recent literature.
Authors 3
-
Minu Treesa Abraham corresponding Aachen Methods for Model–based Development in Computational Engineering
RWTH Aachen University · Norwegian Geotechnical Institute
Affiliation as printed
Instrumentation and Monitoring Section, Norwegian Geotechnical Institute, Oslo, Norway
Methods for Model-Based Development in Computational Engineering, RWTH Aachen University, Aachen, Germany
-
Neelima D. Satyam corresponding
Indian Institute of Technology Indore
Affiliation as printed
Department of Civil Engineering, Indian Institute of Technology Indore, Indore, India
Department of Civil Engineering, Indian Institute of Technology Indore, Indore, Madhya Pradesh, India
-
Julia Kowalski corresponding Aachen Methods for Model–based Development in Computational Engineering
Affiliation as printed
Methods for Model-Based Development in Computational Engineering, RWTH Aachen University, Aachen, Germany
Cited by 9 stored of 9
9 results
No patents citing this paper on Lens.org (checked 2026-10-06).