Bending fatigue performance due to different roughing-finishing sequences and post-processing of components produced by Wire EDM

Procedia CIRP, vol. 123, pp. 298–303

Abstract

The relationships between machining conditions, boundary layer and mechanical component functionality are known qualitatively for selected Wire Electrical Discharge Machining (Wire EDM/WEDM) applications and continuous further developments of this manufacturing technology minimize the thermal influences significantly. Nevertheless, the use of WEDM processes has so far been severely limited in safety-critical applications, especially in the field of turbomachinery construction and aerospace. For example, the removal of the generated surface layers is often still mandatory, although cutting processes can also leave a distinct thermo-mechanically influenced rim zone on the component. This conservative approach currently unnecessarily reduces the manufacturing potential of WEDM processes considerably and calls for an objective comparison of component function. In this paper, therefore, the flexural bending fatigue strengths of differently wire-eroded surfaces based on roughing-finishing sequences and optional post-processing treatment are compared with industrially established reference process chains.

Authors 5

1. Lukas Welschof Aachen Manufacturing Technology Institute (MTI)

   RWTH Aachen University

   Affiliation as printed

   Manufacturing Technology Institute (MTI) of RWTH Aachen University, Campus-Boulevard 30, 52074 Aachen, Germany

2. Jan Wittenburg Aachen Manufacturing Technology Institute (MTI)

   RWTH Aachen University

   Affiliation as printed

   Manufacturing Technology Institute (MTI) of RWTH Aachen University, Campus-Boulevard 30, 52074 Aachen, Germany

3. Timm Petersen Aachen Manufacturing Technology Institute (MTI)

   RWTH Aachen University

   Affiliation as printed

   Manufacturing Technology Institute (MTI) of RWTH Aachen University, Campus-Boulevard 30, 52074 Aachen, Germany

4. Tim Herrig Aachen Manufacturing Technology Institute (MTI)

   RWTH Aachen University

   Affiliation as printed

   Manufacturing Technology Institute (MTI) of RWTH Aachen University, Campus-Boulevard 30, 52074 Aachen, Germany

5. A. Klink corresponding Aachen Manufacturing Technology Institute (MTI)

   RWTH Aachen University

   Affiliation as printed

   Manufacturing Technology Institute (MTI) of RWTH Aachen University, Campus-Boulevard 30, 52074 Aachen, Germany