Analysis of the microstructural connectivity and compressive behavior of particle aggregated silica aerogels

PAMM, vol. 24

Abstract

Abstract Porous media such as aerogels can exhibit unique properties including low thermal conductivity, low bulk density, and low sound velocity. However, the limited mechanical properties of aerogels restrict their widespread application. This study focuses on understanding the mechanical behavior of aggregated silica aerogels by investigating their microstructural connectivity and densification mechanisms under uniaxial compression. The interparticle connectivity is generated using the diffusion‐limited cluster–cluster aggregation (DLCA) algorithm, and the particle connections are modeled by beam elements that account for contact interaction. The mechanical response of representative volume elements (RVEs) is analyzed in both linear and nonlinear regimes while applying periodic boundary conditions. The model is correlated with experimental compression test data to validate the simulation results. With increasing compressive strain, load transitions between multiple backbone paths appear in the network structure. Thus, the simulation model provides insight into the compression process. Moreover, the simulation model enables the examination of the influence of various model parameters and facilitates the evaluation of the power–law relationship between the elasticity modulus and porosity of aerogels.

Authors 5

1. W.W. Xiong corresponding Aachen Department of Continuum Mechanics

   RWTH Aachen University

   Affiliation as printed

   Department of Continuum Mechanics RWTH Aachen University Aachen Germany

   Department of Continuum Mechanics, RWTH Aachen University, Aachen, Germany

2. Rasul Abdusalamov Aachen Department of Continuum Mechanics

   RWTH Aachen University

   Affiliation as printed

   Department of Continuum Mechanics RWTH Aachen University Aachen Germany

   Department of Continuum Mechanics, RWTH Aachen University, Aachen, Germany

3. Mikhail Itskov Aachen Department of Continuum Mechanics

   RWTH Aachen University

   Affiliation as printed

   Department of Continuum Mechanics RWTH Aachen University Aachen Germany

   Department of Continuum Mechanics, RWTH Aachen University, Aachen, Germany

4. Barbara Milow

   Deutsches Zentrum für Luft- und Raumfahrt e. V. (DLR)

   Affiliation as printed

   Department of Aerogels and Aerogel Composites Institute of Materials Research, German Aerospace Center Cologne Germany

   Department of Aerogels and Aerogel Composites, Institute of Materials Research, German Aerospace Center, Cologne, Germany

5. Ameya Rege

   Deutsches Zentrum für Luft- und Raumfahrt e. V. (DLR)

   Affiliation as printed

   Department of Aerogels and Aerogel Composites Institute of Materials Research, German Aerospace Center Cologne Germany

   Department of Aerogels and Aerogel Composites, Institute of Materials Research, German Aerospace Center, Cologne, Germany