Utilising Portable Laser-Induced Breakdown Spectroscopy for Quantitative Inorganic Water Testing
Chemosensors, vol. 11, pp. 479
Abstract
At present, the majority of water testing is carried out in the laboratory, and portable field methods for the quantification of elements in natural waters remain to be established. In contrast, portable instruments like portable X-ray fluorescence (pXRF) analysis and portable laser-induced breakdown spectroscopy (pLIBS) have become routine analytical methods for the quantification of elements in solids. This study aims to show that pLIBS can also be used for chemical compositional measurements of natural waters. Bottled mineral waters were selected as sample materials. A surface-enhanced liquid-to-solid conversion technique was used to improve the detection limits and circumvent the physical limitations in liquid analysis. The results show that low to medium mineralised waters can be analysed quantitatively for their ions using the documented method. For more highly concentrated samples, typically above an electrical conductivity (EC) of 1000 µS/cm, further adjustment is required in the form of self-absorption correction. However, water with a conductivity up to this limit can be analysed for the main cations (Li+, Na+, Mg2+, K+, Ca2+, and Sr2+) as well as the main anions (SO42− and Cl−) using the documented method. This study demonstrates that there is significant potential for developing field-based pLIBS as a tool for quantitative water analysis.
Authors 3
-
Affiliation as printed
Institute of Mineral Resources Engineering, RWTH Aachen University, 52062 Aachen, Germany
-
Affiliation as printed
Institute of Mineral Resources Engineering, RWTH Aachen University, 52062 Aachen, Germany
-
Affiliation as printed
MHI Gruppe, 63456 Hanau, Germany
Cited by 8 stored of 9
8 results
No patents citing this paper on Lens.org (checked 2026-10-06).