Using System Reliability Concepts to Derive Partial Safety Factors for Punching Shear with Shear Reinforcement: An Explorative Analysis

Applied Sciences, vol. 13, pp. 1360

Abstract

Punching shear-reinforced flat slabs can fail in three modes: (1) inside the shear-reinforced zone, (2) outside the shear-reinforced zone, or (3) at the maximum punching shear capacity. By using the theory of structural systems reliability, this study investigates how these failure modes combined affect the safety level of reinforced concrete flat slabs with punching shear reinforcement, and ultimately, the variation of partial factors. Based on DIN EN 1992-1-1 together with the German National Annex DIN EN 1992-1-1+NA(D), and by using distinct reliability-based methods (i.e., levels II and III), the variation in the system failure probabilities and, consequently, partial factors were analysed. The results indicated that partial factors can fluctuate significantly depending on the governing ultimate limit state function and the scatter of basic variables. Furthermore, they indicated that the chosen reliability-based method had a significant influence on the resulting safety level. The sensitivity analysis confirmed the premise that partial factors can be reduced without compromising socially accepted safety levels (e.g., recommended in DIN EN 1990). Ultimate benefits include material and cost savings and CO2 emission reductions. Finally, the approach addressed in this paper offers a new perspective on the derivation of partial factors that can be considered by engineering practitioners.

Authors 4

1. Tânia Feiri corresponding

   University of Applied Sciences Biberach

   Affiliation as printed

   Institute of Structural Engineering, Hochschule Biberach—University of Applied Sciences, 88400 Biberach an der Riß, Germany

2. Jan Philip Schulze‐Ardey Aachen Institute of Structural Concrete

   RWTH Aachen University

   Affiliation as printed

   Institute of Structural Concrete, RWTH Aachen University, 52074 Aachen, Germany

3. Marcus Ricker

   RheinMain University of Applied Sciences

   Affiliation as printed

   Faculty of Architecture and Civil Engineering, RheinMain University of Applied Sciences, 65197 Wiesbaden, Germany

4. Josef Hegger Aachen Institute of Structural Concrete

   RWTH Aachen University

   Affiliation as printed

   Institute of Structural Concrete, RWTH Aachen University, 52074 Aachen, Germany