Deep Rolling of Bores Using Centrifugal Force

Abstract

Deep rolling is a mechanical surface treatment for the specific modification of edge zone properties. In this process, the surface is plastically deformed by a rolling element. The roughness, residual stresses and hardness in particular can be positively influenced. An external pressure unit is usually used to generate the forces required for plastic deformation. The acquisition costs associated with the pressure unit and the space required reduce the attractiveness of deep rolling. In this work, the possibility of generating the required forces by exploiting the rotational speed of machining center spindles for processing bores is shown.

Authors 4

1. Lars Uhlmann corresponding Aachen Laboratory for Machine Tools and Production Engineering (WZL)

   RWTH Aachen University

   Affiliation as printed

   Laboratory for Machine Tools and Production Engineering (WZL), RWTH Aachen University, 52074 Aachen, Germany

2. Ingo Felix Weiser Aachen Laboratory for Machine Tools and Production Engineering (WZL)

   RWTH Aachen University

   Affiliation as printed

   Laboratory for Machine Tools and Production Engineering (WZL), RWTH Aachen University, 52074 Aachen, Germany

3. Tim Herrig Aachen Laboratory for Machine Tools and Production Engineering (WZL)

   RWTH Aachen University

   Affiliation as printed

   Laboratory for Machine Tools and Production Engineering (WZL), RWTH Aachen University, 52074 Aachen, Germany

4. Thomas Bergs Aachen Fraunhofer Institute for Production Technology Laboratory for Machine Tools and Production Engineering (WZL)

   RWTH Aachen University · Fraunhofer Institute for Production Technology IPT

   Affiliation as printed

   Fraunhofer Institute for Production Technology, 52074 Aachen, Germany

   Laboratory for Machine Tools and Production Engineering (WZL), RWTH Aachen University, 52074 Aachen, Germany