Dynamic phasors
Abstract
The following simulation represents a three-phase fault for the synchronous generator as described in Kundur [1] (Example 3.1). The simulation is conducted with dynamic phasor (DP) variables shifted by the nominal frequency of 60 Hz. Figure 8.1 shows the currents at the synchronous generator terminal. The fault occurs at 0.1 s and is cleared at 0.2 s. In this simulation, the clearing is instantly without waiting for a zero crossing of the current.
Authors 3
-
RWTH Aachen University · Fraunhofer Institute for Applied Information Technology
Affiliation as printed
Fraunhofer FIT Center for Digital Energy
Institute for Automation of Complex Power Systems
RWTH Aachen University
Institute for Automation of Complex Power Systems, RWTH Aachen University, , Germany
-
RWTH Aachen University · Fraunhofer Institute for Applied Information Technology
Affiliation as printed
Fraunhofer FIT Center for Digital Energy
Institute for Automation of Complex Power Systems
RWTH Aachen University
Institute for Automation of Complex Power Systems, RWTH Aachen University, , Germany
-
RWTH Aachen University · Fraunhofer Institute for Applied Information Technology
Affiliation as printed
Fraunhofer FIT Center for Digital Energy
Institute for Automation of Complex Power Systems
RWTH Aachen University
Institute for Automation of Complex Power Systems, RWTH Aachen University, , Germany
Cited by 0 stored of 0
No patents citing this paper on Lens.org (checked 2026-10-06).