Experimental and simulation-based analysis of asymmetrical spherical roller bearings as main bearings for wind turbines

Forschung im Ingenieurwesen, vol. 85, pp. 189–197

Abstract

Abstract Symmetrical spherical roller bearings (SSRB) used as main bearings for wind turbines are known for their high load carrying capacity. Nevertheless, even designed after state-of-the-art guidelines premature failures of this bearing type occur. One promising solution to overcome this problem are asymmetrical spherical roller bearings (ASRB). Using ASRB the contact angles of the two bearing rows can be adjusted individually to the load situation occurring during operation. In this study the differences between symmetrical and asymmetrical spherical roller bearings are analyzed using the finite element method (FEM). Therefore, FEM models for a three point suspension system of a wind turbine including both bearings types are developed. These FEM models are validated with measurement data gained at a full-size wind turbine system test bench. Taking into account the design loads of the investigated wind turbine it is shown that the use of an ASRB leads to a more uniform load distribution on the individual bearing rows. Considering fatigue-induced damage an increase of the bearing life by 62% can be achieved. Regarding interactions with other components of the rotor suspension system it can be stated that the transfer of axial forces into the gearbox is decreased significantly.

Authors 5

1. Amin Loriemi corresponding Aachen CWD—Chair for Wind Power Drives

   RWTH Aachen University

   Affiliation as printed

   CWD—Chair for Wind Power Drives, RWTH Aachen University, Campus-Boulevard 61, 52074, Aachen, Germany

   CWD—Chair for Wind Power Drives, RWTH Aachen University, Campus-Boulevard 61, 52074, Aachen, Germany

2. Georg Jacobs Aachen CWD—Chair for Wind Power Drives

   RWTH Aachen University

   Affiliation as printed

   CWD—Chair for Wind Power Drives, RWTH Aachen University, Campus-Boulevard 61, 52074, Aachen, Germany

   CWD—Chair for Wind Power Drives, RWTH Aachen University, Campus-Boulevard 61, 52074, Aachen, Germany

3. Sebastian Reisch Aachen CWD—Chair for Wind Power Drives

   RWTH Aachen University

   Affiliation as printed

   CWD—Chair for Wind Power Drives, RWTH Aachen University, Campus-Boulevard 61, 52074, Aachen, Germany

   CWD—Chair for Wind Power Drives, RWTH Aachen University, Campus-Boulevard 61, 52074, Aachen, Germany

4. Dennis Bosse Aachen CWD—Chair for Wind Power Drives

   RWTH Aachen University

   Affiliation as printed

   CWD—Chair for Wind Power Drives, RWTH Aachen University, Campus-Boulevard 61, 52074, Aachen, Germany

   CWD—Chair for Wind Power Drives, RWTH Aachen University, Campus-Boulevard 61, 52074, Aachen, Germany

5. Tim Schröder Aachen CWD—Chair for Wind Power Drives

   RWTH Aachen University

   Affiliation as printed

   CWD—Chair for Wind Power Drives, RWTH Aachen University, Campus-Boulevard 61, 52074, Aachen, Germany

   CWD—Chair for Wind Power Drives, RWTH Aachen University, Campus-Boulevard 61, 52074, Aachen, Germany