A
Menu
October 23, 2020 article Aachen paper

The effect of homogenization temperature on the microstructure and high temperature mechanical performance of SLM-fabricated IN718 alloy

Materials Science and Engineering A, vol. 801, pp. 140427

DOI: 10.1016/j.msea.2020.140427 OpenAlex

Authors 8

  1. Ming Zhou Cao

    Beijing University of Technology

    Affiliation as printed

    Beijing Engineering Research Center of 3D Printing for Digital Medical Health, Beijing, China

    Institute of Laser Engineering, Faculty of Materials and Manufacturing, Beijing University of Technology, Pingleyuan No. 100, Chaoyang Dist, Beijing, 100124, China

  2. Dongyun Zhang corresponding

    Beijing University of Technology

    Affiliation as printed

    Beijing Engineering Research Center of 3D Printing for Digital Medical Health, Beijing, China

    Institute of Laser Engineering, Faculty of Materials and Manufacturing, Beijing University of Technology, Pingleyuan No. 100, Chaoyang Dist, Beijing, 100124, China

  3. Yang Gao

    Beijing University of Technology

    Affiliation as printed

    Beijing Engineering Research Center of 3D Printing for Digital Medical Health, Beijing, China

    Institute of Laser Engineering, Faculty of Materials and Manufacturing, Beijing University of Technology, Pingleyuan No. 100, Chaoyang Dist, Beijing, 100124, China

  4. Runping Chen

    Beijing University of Technology

    Affiliation as printed

    Beijing Engineering Research Center of 3D Printing for Digital Medical Health, Beijing, China

    Institute of Laser Engineering, Faculty of Materials and Manufacturing, Beijing University of Technology, Pingleyuan No. 100, Chaoyang Dist, Beijing, 100124, China

  5. Guoliang Huang

    Beijing University of Technology

    Affiliation as printed

    Beijing Engineering Research Center of 3D Printing for Digital Medical Health, Beijing, China

    Institute of Laser Engineering, Faculty of Materials and Manufacturing, Beijing University of Technology, Pingleyuan No. 100, Chaoyang Dist, Beijing, 100124, China

  6. Reinhart Poprawe Aachen Fraunhofer Institute for Laser Technology ILT

    Fraunhofer Institute for Laser Technology

    Affiliation as printed

    Fraunhofer Institute for Laser Technology ILT, Aachen, Germany

  7. Johannes Henrich Schleifenbaum Aachen Fraunhofer Institute for Laser Technology ILT

    Fraunhofer Institute for Laser Technology · RWTH Aachen University

    Affiliation as printed

    Fraunhofer Institute for Laser Technology ILT, Aachen, Germany

    RWTH Aachen University – Digital Additive Production (DAP), Aachen, Germany

  8. Stephan Ziegler Aachen

    RWTH Aachen University

    Affiliation as printed

    RWTH Aachen University – Digital Additive Production (DAP), Aachen, Germany

Cited by 105 stored of 105

No patents citing this paper on Lens.org (checked 2026-10-06).

References 38