Methods to Classify Bainite in Wire Rod Steel
steel research international, vol. 92
Abstract
The microstructural description in bainitic steel is commonly ambiguous, and the interpretations of results that originate from applied methods are usually user dependent. In consequence, a manifold description of bainite makes it difficult to reveal structure–property relationships. This is why a novel classification and quantification routine for bainitic microstructures in wire rod steel is presented. The classification is based on electron probe microanalysis (EPMA), electron backscatter diffraction (EBSD), and nanohardness of the same local area. Microstructural constituents with different characteristics (carbon concentration, misorientation, and nanohardness) are classified into low‐, intermediate‐, and high‐temperature morphologies. After the classification, quantification is conducted by combining scanning electron microscopy (SEM) analysis, dilatometry, and X‐ray diffraction (XRD). The bainite quantification reveals a homogeneous microstructure for cooling along the lower bainite regime. Increasing the manganese content causes a lower sensitivity to change in the cooling parameters. Combining nanohardness and EBSD is suitable to describe microscopic microstructural properties, whereas the quantification of bainite is eligible to explain differences in the microscopic microstructural properties. The used approach avoids overcomplexity and manifold terminologies of bainitic microstructures that are commonly found in the literature.
Authors 8
-
Affiliation as printed
Steel Institute RWTH Aachen University Intzestr. 1 52072 Aachen Germany
Steel Institute, RWTH Aachen University, Intzestr. 1, 52072 Aachen, Germany
-
Affiliation as printed
Bars and Wires ArcelorMittal Global Research and Development Voie Romaine BP 30320 57283 Maizières-Lès-Metz Cedex France
-
Affiliation as printed
Bars and Wires ArcelorMittal Global Research and Development Voie Romaine BP 30320 57283 Maizières-Lès-Metz Cedex France
-
Affiliation as printed
Bars and Wires ArcelorMittal Global Research and Development Voie Romaine BP 30320 57283 Maizières-Lès-Metz Cedex France
-
Affiliation as printed
Maizières Products ArcelorMittal Global Research and Development Voie Romaine BP 30320 57283 Maizières-Lès-Metz Cedex France
-
Affiliation as printed
Central Facility for Electron Microscopy RWTH Aachen University Mies-van-der-Rohe-Straße 59 52074 Aachen Germany
-
Affiliation as printed
Institute of Physical Metallurgy and Metal Physics RWTH Aachen University Kopernikusstr. 14 52074 Aachen Germany
Institute of Physical Metallurgy and Metal Physics, RWTH Aachen University, Kopernikusstr. 14, 52074 Aachen, Germany
-
Affiliation as printed
Steel Institute RWTH Aachen University Intzestr. 1 52072 Aachen Germany
Steel Institute, RWTH Aachen University, Intzestr. 1, 52072 Aachen, Germany
Cited by 6 stored of 6
6 results
No patents citing this paper on Lens.org (checked 2026-10-06).