Effect of microstructure evolution in austenite zone on mechanical properties of Fe-10Mn-5.5Al-0.25C steel

Materials & Design, vol. 196, pp. 109163

Abstract

The microstructure of Fe-Mn-Al-C alloys is largely influenced by heat treatment, which leads to different mechanical properties. The current work investigated the microstructure evolution in the austenite zone in a low density steel Fe-10Mn-5.5Al-0.25C at the heat treatment temperature range of 850 °C–1000 °C. The microstructure features have been characterized by SEM, TEM. The results indicate that the soaking temperature has great influence on the room-temperature mechanical properties, even promotes austenite-to-martensite transformation at 1000 °C heat treatment. The increased temperature and austenite zone fraction degrade the stability of austenite, whilst the small B2 phase shows no detrimental effect on mechanical properties. The product of tensile strength and elongation increases from 28 to 50 GPa% is due to multiple deformation mechanisms with austenite zone fraction increased. And the transformed martensite at 1000 °C significantly decreases the mechanical properties. So, the improved mechanical properties maybe attributed to the coordination function of dislocations pile-up and cut through the B2 phase, and strengthened TWIP effect as heat treatment temperature below 1000 °C.

Authors 9

1. Wei Peng corresponding

   Shanghai University

   Affiliation as printed

   School of Materials Science and Engineering, Shanghai University, Shanghai 200444, China

   Shanghai University New Materials (Taizhou) Research Institute, Taizhou 225500, China

2. Xinqiang Gao

   Shanghai University

   Affiliation as printed

   School of Materials Science and Engineering, Shanghai University, Shanghai 200444, China

3. Xiaofei Guo Aachen Steel Institute

   RWTH Aachen University

   Affiliation as printed

   Steel Institute, RWTH Aachen University, Aachen 52072, Germany

4. Hengchang Lu

   Shanghai University

   Affiliation as printed

   School of Materials Science and Engineering, Shanghai University, Shanghai 200444, China

   Shanghai University New Materials (Taizhou) Research Institute, Taizhou 225500, China

5. Guangshi Li

   Shanghai University

   Affiliation as printed

   School of Materials Science and Engineering, Shanghai University, Shanghai 200444, China

6. Xueshan Xiao

   Shanghai University

   Affiliation as printed

   School of Materials Science and Engineering, Shanghai University, Shanghai 200444, China

7. Dexiang Xu

   Shanghai University

   Affiliation as printed

   School of Materials Science and Engineering, Shanghai University, Shanghai 200444, China

   Shanghai University New Materials (Taizhou) Research Institute, Taizhou 225500, China

8. Xicheng Wei

   Shanghai University

   Affiliation as printed

   School of Materials Science and Engineering, Shanghai University, Shanghai 200444, China

   Shanghai University New Materials (Taizhou) Research Institute, Taizhou 225500, China

9. Dong Hwan Han

   Shanghai University

   Affiliation as printed

   School of Materials Science and Engineering, Shanghai University, Shanghai 200444, China

   Shanghai University New Materials (Taizhou) Research Institute, Taizhou 225500, China